Sign In | Join Free | My polstate.com
polstate.com
Products
Search by Category
Home >

Desiccant Heatless Adsorption Dryers

Categories Adsorption Air Dryer
Brand Name: Hongjinli
Name: Adsorption Air Dryer
dew point of compressed air: -40℃
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Desiccant Heatless Adsorption Dryers

    Adsorption Air Dryer


    1. Work flow of heatless regeneration adsorption dryer
    The heatless regeneration adsorption dryer uses a pressure swing adsorption regeneration cycle to exchange compressed air through two drying cylinders A and B filled with adsorbent, that is, when one cylinder absorbs water vapor under a high partial pressure (working pressure) state , the other drying cylinder analyzes at low partial pressure (accepts atmospheric pressure), and then switches according to the set time program.


    Adsorption
    The wet air enters the A drying cylinder from the lower pipe diameter through the A1 valve, and then
    Flows upward through the adsorbent layer, and the dried air is discharged from the upper piping system.
    regeneration
    Part of the dry air (about 14%) passes through the upper duct system to regenerate the air
    Adjust the valve to enter the B drying cylinder, and the decompressed dry air (called regeneration gas) will analyze and regenerate the adsorbent in the B drying cylinder from top to bottom to restore the drying capacity of the adsorbent. The regeneration gas passes through the lower pipe B2 valve and The muffler vents to the atmosphere.
    equalize pressure
    After the adsorbent regeneration is completed, the B2 valve is closed and the B drying cylinder
    Press to online working pressure and prepare to switch.
    switch
    The B1 valve of the lower pipe system is open, the A1 valve is closed, and the A2 valve is open.
    The two drying cylinders A and B are switched, cylinder B enters adsorption, and cylinder A is depressurized and regenerated. The working sequence and working time are automatically controlled by the controller.


    heatless/micro heat (LH) regenerative adsorption dryer technical parameters
    modelair treatment(m3/min)Pipe diameter(mm)Dimensions(length x width x height mm)Heating power/power supply (micro heat)Equipment weight (heatless Kg)Equipment weight (micro heat Kg)
    BX00050.8DN15600X350X1500 70 
    BX0010(LH)1.8DN20650X450X15000.35/2208095
    BX0020(LH)2.8DN20700X450X15000.5/220100120
    BX0030 (LH)3.8DN25900X480X16000.75/220130140
    BX0040(LH)5.5DN401000X650X17501.25/220250270
    BX0060(LH)6.8DN401000X700X18001.5/220280300
    BX0080(LH)8.8DN501100X700X19002.0/220450480
    BX0100(LH)11.5DN501100X650X20502.5/220500530
    BX0120(LH)14DN651200X850X22003.0/380550580
    BX0150(LH)16DN651200X850X22003.75/380580620
    BX0200(LH)22.8DN801400X1000X23505.0/380860900
    BX0250(LH)28.5DN801400X1000X25006.25/38012001250
    BX0300(LH)35DN801750X1100X25007.5/38016001700
    BX0400(LH)45DN1001700X1100X260010/38019002000
    BX0500(LH)55DN1001900X1200X280012.5/38023002500
    BX0600(LH)65DN1252000X1300X280015/38028003000
    BX0800(LH)85DN1502200X1600X290020/38034003800
    BX1000(LH)105DN1502600X1600X296025/38041004500
    BX1200(LH)120DN2003200X1600X300030/38045005000
    BX1600(LH)160DN2003800X1800X300040/38060006500
    BX2000 (LH)200DN2504200X2000X300050/38075008000
    Note: BX0005-BX2000 models are twin-tower traditional structures; (LH) is a low-heat adsorption dryer
    Quality Desiccant Heatless Adsorption Dryers for sale
    Send your message to this supplier
     
    *From:
    *To: Suzhou Hongjinli Gas Equipment Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0