iec terminal test probe c

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

... for earth or antenna or for audio, video or associated signals, shall not involve the risk of an electric shock. The test is not applied to TERMINALS marked with the symbol of 5.3 b). Test Finger Probe NOTE See also 1 5.1 .2. Compliance is checked by

Model Number:TP41

... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.

Brand Name:JLX

Model Number:LX-0368K

Place of Origin:Made in China

... 20 mm Terminal Probe 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) Diameter 1 mm, Length 20 mm Terminal Probe Company introduction HK LEE HING INDUSTRY CO., LIMITED are

Brand Name:HeJin

Model Number:HT-I04

Place of Origin:China

... Degrees of protection provided by enclosures (IP Code) IP4X IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: This wire is intended to verify the protection of persons against access to

Brand Name:Sinuo

Model Number:SN2210-5

Place of Origin:China

IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Brand Name:PEGO

Model Number:PG-TP31

Place of Origin:China

IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the ...

Brand Name:kingpo

Model Number:IEC61032-Fig2

Place of Origin:china

material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:KingPo

Place of Origin:China

... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

...:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:kerang

Model Number:HT-I27

Place of Origin:CHINA

...:It is used for interlocking apparatus of the covert door of microwave oven. Test sample:Microwave oven. Feature:Please use according to related standard. Parameters: Model HT-I28 Probe diameter Ф3 0 -0.10 Handle diameter Ф10 Probe length 100±0.2

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT632

... years industry experience in research and development, Habotest standardized its management and quality systems, obtaining ISO9001-2008 and ISO/TS16949, CE, IEC safety standards and

Brand Name:GENY

Model Number:YC-232/USB-IEC-TL

Place of Origin:China

...Probe Iec 62056 21 Optical Probe IEC 62056-21 Standard Optical Probe The Optical Probe is a specialized accessory designed for testing electricity meters that feature an optical interface. This precision instrument facilitates the non-contact reading of data, enhancing the efficiency and accuracy of meter testing...

Brand Name:YANTAK

Model Number:Test Lead Kit

Place of Origin:CHINA

...Test Aids Electrical Terminal Kit Auto Diagnostic Tools Wire Adapter Cables Set Contains Quantity 5KΩPotentiometer (Variable Resister) 2pcs LEDStroboscope 2pcs Various automotive flat terminals 48pc Acicular Probe 4pcs Various automotive circular terminals 24pcs Probe 2pcs 1 to 2 connector 2pcs Alligator clip 2pcs 1 to 1 connector 4pcs SRS connector 2pcs TEST...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:Gaoxin

Model Number:GX-4022

Place of Origin:China

...Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1.Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2.Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal...

Brand Name:MECHAN

Model Number:PLA201

Place of Origin:China

...Probe / Bipolar Radiofrequency Plasma Wand for Urology Surgery Indications: BPH (Benign Prostate Hyperplasia), Bladder tumor PLA series products inspection items: Biocompatibility: cytotoxicity EN ISO 10993-5:2009 Test of packaging materials EN ISO 11607-1:2009 Safety regulations Third Edition EN 60601-1:2006/AC:2012 Obtained the CE Certificate and RoHS Certificate, Passed the EMC detection IEC 62321:2008 IEC...

Brand Name:LCS

Model Number:Terminals for external conductors test requirements

Test Object: Household and similar electrical appliances Item/Parameter: Terminals for external conductors test requirements Standard or Method: Household and similar electrical appliances - safety - Part 1:general requirements GB 4706.1-2005 26 Household and similar electrical appliances - safety - Part 1:general requirements IEC...