iec 60695 2 10 flammability testing equipment

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

IEC 60695-11-5 Flammability Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

Needle Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be ...

Brand Name:SKYLINE

Model Number:SL-7610

Place of Origin:China

...Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, household appliances, electric tools and instruments. It is also applied to plastics and insulation materials, electric connectors etc. Standards According to IEC60695-2-10~13, IEC829, IEC...

Brand Name:YUYANG

Model Number:YY213

Place of Origin:China

...Flammability Tester with IEC 60332-3-10 Products: Bunched Cable Vertical Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wire and cable burning test requirements. And meet with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standards. Bunched Cable Vertical Flame Spread Tester is an equipment which used to test...

Brand Name:kingpo

Model Number:KP-FT04

Place of Origin:china

...Flammability Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test...

Brand Name:HUST Tony

Model Number:HTB-066B

Place of Origin:Guangdong,China(Mainland)

...test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210. 50W Vertical flame test:UL94, V0,V1,V2,IEC 60695-11-10,ISO 1210. 500W Vertical flame test:UL94 5VA,5VB,IEC 60695-11-3,ISO 9770. Film material Vertical flame test:VTM-0,VTM-1,VTM-2,ISO 9773； Foam material Vertical flame test:HF-1,HF-2,HBF,ISO 9772. Application: Test the flammability of the plastic material spare part in appliances. Flammability...

Brand Name:PEGO Group

Model Number:GW-1H

Place of Origin:China

..., IEC 60695-2-11, GB/T 5169.11, IEC 60695-2-12, GB/T 5169.12, IEC 60695-2-13, GB/T 5169.13, IEC62368-1 Section 6.3.1, IEC60598-1 Section 13.3.2, IEC60335-1 Section 30.1. It is widely used in material testing on lamps, household appliances, IT/AV equipment,

Brand Name:GOLD

Model Number:GD-IEC 60695-2-10

Place of Origin:CHINA

...technical specifications of the "glow wire test method" in IEC60695-2-10, GB/T5169.10, GB/T5169.13 and GB4706.1 standards. It is specially used to evaluate the fire resistance of electrical and electronic equipment, household appliances and their

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

...flammability testing equipment for the hot wire tester complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test...

Brand Name:Sinuo

Model Number:SN772C

Place of Origin:China

...IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time. It is suitable for

Brand Name:AI

Model Number:UL-94T

Place of Origin:CHINA

... flammability, burning rate, flame spread, burning flame retardancy. This machine has high degree of automation, and its test data is accurate. Standards UL94 V-0,V-1,V-2,IEC 60695-11-10,IEC 60707,ISO 1210 Main Features Cabinet and fixture features: 1.1

Brand Name:Haida

Model Number:6015-HD

Place of Origin:China

Flame Temperature Calibration Device 500W Product Description This calibration device is designed in accordance with ASTM D5207-03 and related IEC, UL, GB standards for measuring flame temperatures in combustion test equipment. Calibration Procedure ...

Brand Name:HOOHA

Model Number:ZY6017

Place of Origin:China

ZY6017 Plastic Horizontal Vertical Combustion Test Machine With Stainless Steel Test Support Scope of application: It is mainly used to determine the fire resistance of plastic or plastic parts by burning in the horizontal or vertical direction under the ...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

IEC 60695 Glow Wire Test Machine for Electronic Products 1. Test Standard IEC60695-2-10/11/12/13

Brand Name:GAOXIN

Model Number:GX-4030

Place of Origin:Guangdong

...Flammability of Plastic Materials for Parts in Devices and Appliance Test Equipment 1. Product Name: UL94 Vertical flammability test equipment 2. Test Standard: UL94, IEC 60335-1, IEC 60695-2-4,IEC 60695-11-10... Note: UL94 Flammability Test equipment can ...

Brand Name:vouch

Model Number:5340

Place of Origin:vouch

Technology data: 1.)Accord with standard:UL94 IEC 60695-11 2.)SIZE:1200*600*1120 3.)Inner case volume:0.75 cbm 4.)flame height adjust:10-200mm 5.)flame flow rate adjust:20-200mm/min 6.)flame differential pressure:5-200mm water columm 7.)flame angle adjust...

Brand Name:DAXIAN

Model Number:DX8521

Place of Origin:China

UL 1694 & IEC 60695 Automatic Ignition Needle Flame Testing Machine for Electronic Parts Usage: Electrical and electronic products due to the use of the process of failure: such as electronic components or electronic parts of the poor contact with overload...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is ...