Rubber vulcanizing machine, Rubber hydraulic molding machine,
Rubber Hydraulic Press
Production Name: Hot Plate Vulcanizing Press Machine
1.Frame: The material is Q345 steel welded, and using Co2
protection welding process. high strength, no air hole, not easy
broken, then using the tempering process, to release the internal
stress. It is not out of shape, using the CNC machining center
2.Heating pipes: 45# steel,long using life
3.Plunger: Vanadium and titanium Alloy Chilled Cast Iron, High
hardness (68~72HS )and good abrasion , resistance, can not break
the seals easily
4.Hydraulic cylinder: Nodular cast iron, the material is QT-500,
hardness 68~72 HS, using the annealing treatment, and choosing the
best flaw detection process.
5.The heating plate :35# steel
6. Thermal baffle: Silicon 3 Calcium plate, not break the seals
7. Valve: Cartridge valve, not easy broken and no need maintain
brand from Huade (China-Germany joint venture )
8.Hydraulic pump: Brand from YUCI YUKEN HYDRAULICS Co., LTD Japan
9. Low-voltage apparatus: The brand from Schneider or Siemens
The lates advances in CAD, CAM, CAE systems, meterial science,
unbelievable manufacturing speeds,.
We are able to make presses from 25-ton to 10,000-ton forces as
1)Four Pillar Type
3)Fully automatic PLC controlled with touch screen user interface.
4)Vacuum Molding Hydraulic Press
1) Electrical heaters
2) Thermic fluid heating suitability
3) Steam heating suitability.
|Total pressure (MN)||0.15||0.25||0.5||0.63||1.00||1.20|
|Unit area pressure of hot plate(Mpa)||2.60||2.04||3.13||2.52||2.77||2.45|
|Piston stroke (mm)||250||250||250||250||250||250|
|Main motor power (KW)||2.2||2.2||2.2||2.2||2.2||2.2|
|Size: L × W × H (mm)||1200×350×1300||1400×480×1380||1600×500×1480||1750×600×1540||1880×720×1680||2000×850×1750|
|Total pressure (MN)||1.60||2.00||3.15||5.60||7.50||10.00||18.00|
|Unit area pressure of hot plate(Mpa)||2.51||2.47||2.19||2.15||2.5||3.33||3|
|Piston stroke (mm)||400||400||400||400||400||400||400|
|Main motor power (KW)||3||5.5||3||8||9.5||11||26|
|Size: (L × W × H) (mm)||2250×1200×2200||1400×900|
1. Mainly consists of main machine, hydraulic system and electrical
2. Frame type, with bottom hydraulic cylinder.
3. Adopts hydraulic drive, electric relay control, the curing time
and pressure can be adjusted.
4. The oil tank was arranged at the left side, avoid of the
influence of hot platen temperature.
5. Can provide hand control and electric control as customer's
6. There are two kinds of heating method for hot platen, steam
heating and electric heating.
7. The hot platen clearance can be designed as per the size of
product & mould.
1. Our engineers can design target machines for you and send the
drawing to confirm.
2. In the process of production, we will take photos and send to
customers for you tracking.
3. Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.
4. We could supply free English foundation DWG, installation
drawing, user guide, maintenance manual and part drawing.
5. We supply overseas technical support
6. Test Machine Before Delivery, you only need to connect the wires
to the outside the control cabinet.