Steel Ceiling Wedge Anchor , Ceiling Anchor Nail used for
An anchor is one type of fastener that can attach one object to
another in situations where screw, nail, adhesive or other simple
fasteners are either impractical or ineffective.The most popular
ceiling anchor you can almost called them toggle bolts. The great
thing about toggle bolts is that they expand, creating wings which
span across the ceiling on the inside wall.
Two common surfaces where anchors are used for extremely hard
surfaces such as concrete and on hollow wall surfaces such as
doors, floors,walls and ceilings...especially where there is no
convenient wood stud on the surface.
When you want to hang something from the ceiling, you need to use ceiling anchors and you will risk parts of the ceiling falling down. The home
ceilings are not meant to hold things from it that are of any
considerable weight. This disperses the weight more evenly,
allowing weight to be applied to these ceiling anchor. The most
information contained here will show you how to install ceiling
anchors with more safely and easily.
Step 1 Choose the Location for Ceiling Anchors
First it is very important to pick the right location for the
ceiling anchor because you will be make some holes in the ceiling.
Be completely certain that the area is where you want to hang your
item from. Once you are satisfied with your choice, p. Climb the
ladder but do not stand on the caution step. If you cannot reach
the ceiling without using that step, then get a taller ladder.
Climb to the top and place a mark on the ceiling where the ceiling
anchor will be installed. If you need two ceiling anchors then
measure the width of the object you intend to hang. Always measure
several inches from each side and use the difference in the middle
as your points for installing the anchors. If the item is not too
heavy then hold it up to the ceiling to better determine where you
will place the ceiling anchors. Use a pencil to mark for each
anchor to be installed.
Step 2 Making the Holes
The ceiling, like the walls, floors , are covered with drywall.
Drywall is fairly sturdy but will not hold much weight which makes
ceiling anchors very important in order to keep the ceiling in one
piece. Consult the pack of the ceiling anchors which you purchased.
The package will tell you which drill bit you need to use. Install
the correct drill bit to your electric drill. Rip off two pieces of
masking tape and make a sign like "X" over the circle you made
where you need to drill. If you have more than one hole planned,
then add another "X" to the ceiling. The purpose of the masking
tape is to keep drywall dust to a minimum as well as to prevent
cracking and chipping. Place the drill bit over the circle you
drew, and with even pressure, drill a hole through the ceiling.
Step 3 Install the Ceiling Wedge Anchors
Fold down the sides of the ceiling wedge anchor and then slide the
anchor into the hole until the bolt head is flush against the
ceiling. Pull the anchors downward, and the sides should be open.
The sides will grip the ceiling from inside, which stops you from
pulling it down. This could take several attempts to achieve
The products are used for construction and decoration, such as :
installation of security windows , security doors , rails , street
lamps , carpentry and decoration , integrated ceiling , ceiling ,
floors , hanging tiling and so on.
1) High quality in competitive price
2) Prompt delivery
3) Various types of long- term supply professinal stainless steel
4) Customized services according to the samples and drawings offered.