Categories | Light Keel Roll Forming Machine |
---|---|
Model Number: | light steel keel |
Certification: | CE |
MOQ: | 1 set |
Payment Terms: | T/T, L/C |
Supply Ability: | 30 sets per month |
Delivery Time: | 45 days after receipt of buyer's deposit |
Packaging Details: | Packaging Details: 1. one 20ft container for loading one set machine with manual decoiler; 2. the whole Wiped Anti Rust Oil, PLC controller covered by foam film; 3. Spare parts and some small parts packed in plastic tooling box; 4. All Components Fixed |
Tile Type:: | Colored Glaze Steel |
Model Number:: | light keel roll forming machine |
Thickness:: | 0.3--0.8mm |
Dimension(L*W*H):: | 4.5m*1.2m*1.2m |
Roller material:: | 45# Forged Steel |
Power(W):: | 4+4KW |
Suitable to process:: | Color Steel Plate |
Control system:: | PLC Control |
Warranty:: | 12 Months |
Company Info. |
RFM Cold Rolling Forming Machinery |
Verified Supplier |
View Contact Details |
Product List |
Ceiling Drywall Steel Stud And Track Roll Forming Machine U Channel
Decoiler:
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Inner diameter:350-450mm
Outer diameter:450mm
Coil width:300mm
Capacity:1.5T
Hydraulic oil pump
Advanced hydraulic system from Taiwan
Usage: It is used to provide power for cutting devices.
Power: 3kw
PLC control station
Usage: Automatic length and quantity measurement.
Screen: touch screen
Frequency:Delta
PLC control
PLC:Delta
Run out table
1 set with 3 meter’s long.
De-coiling →feedinig→forming→step-formed mechanism →cutting →product
Parameter
1 | Model No. | Keel Roll Forming Machine |
2 | Thickness | 0.3-0.8mm |
3 | Coli material | GI |
4 | The bearing capacity of manual decoiler | 6.5 tons |
5 | shaft material | 45#steel |
6 | Out diameter | Customized |
7 | numbers of forming steps | Customized |
8 | transmission | chain transmission |
9 | Forming speed | 10-15m/min |
10 | main motor power | 3kw |
11 | voltage | 380V50HZ Three-phase or as required |
12 | dimension | 5*1.3*1.3 |
13 | cutting | hydraulic cutting |
14 | blade material | Cr12 steel with quenched treated 60-62°c |
15 | control system | PLC(Delta) |
16 | length tolerance | ±1mm |
17 | spare parts | 1 easy demaged parts:conk 2pcs, fuse-link 4pcs 2 rubber mat: 1 pcs 3 bolt spanner: 1 pcs |
18 | The whole line including: Manual decoiler, roll forming machine, hydraulic station, hydraulic cutter, PLC control system, run-out table. |