Transparent Colors Dot Body Zorb Ball for Amusement
Bumper Balls are air-tight, heat-sealed inflatable products made
from PVC or TPU. There are three size: 1.2m(for children),
1.5m&1.8m(for adults). Users can strap on the Bumper Ball and
'bump' into each other, much like a Sumo Wrestler game. Bumper Ball
competitors can run into each other, roll on the ground, and even
jump on each other using the Bumper Ball inflatable. It is suitable
for family backyard, playing center, ect.
Color Bumper Ball Details:
transparent Body Zorbing with color strip
1.2m, 1.5m, 1.8m etc.
0.6mmTPU / 0.6mm PVC
Clear(Transparent), Red, Yellow, Blue, Green, Apple Green, Pink,
Black, Orange, Purple, etc.
PVC Tarpaulin Bag + Weaving Bag. (double package)
9kg, 12kg, 14kg.
By Express, By Air or By Sea
According to your requirements
100USD to 240USD
T/T, PayPal,Western Union or Cash
Grass, Beach, Snow, Water Pool etc.
CE/UL Inflatable Pump
Included, TPU/PVC Material, Glue. ect.
Maintain & Storage:
1 Disinfect and clean the ball regularly.
2 Check the ball before using. Any damage, please mend it with our
repairing kit and glue.
3 After use, please remove sundries outside and inside the ball.
4 Before packing, make sure the ball is clean and dry.Then store it
in cool and dry place.
How to Repair it?
5 Find out exactly where the leak is. Fill a spray bottle with a
mixture of soap and water and spray it liberally on the bumper ball
along the seams. You will notice that the solution starts to bubble
up where the leak is located, so take note of the position os the
6 Prepare the hole for patching. Dry the seam off, and make sure
that it is completely deflated before attempting to patch the seam.
If you have the patch kit that came with the bumper ball, you can
use the prep solution to thoroughly clean the rubber before
proceeding. Rubbing alcohol also works.
7 Apply plumber's goop liberally to the seam and let it dry for
about 15minutes. If possible, apply some goop to the inside of the
seam as well, so that it spreads out and gives an extra layer of
protection when the bumper ball pressurizes.
8 Fill the bumper ball about halfway with air and wait another
30minutes or so to make sure that the goop has dried completely.
9 Inflate the item completely and spray it again with the soap and
water mixture to make sure that the hole is indeed fixed.
A, Each ball will be tested for 3 times before leaving factory, the
rate of leaking is controlled within 0.3%,
we promise free change if any leaking problems within first 3
B, Each ball are with repair material and glue in case of any
C, We take all charges to repair and replace if any quality problem
within 3 month